deleted by creator

I’d bet sodimm since lpcamm was dell only until lpcamm2

After jellyfin super is added, I think it might be useful to have a way to just point it at an smb share and select what to clip from there.

Raid 6 takes longer to rebuild but not twice as long, more like 45-50% longer. And raid 5 can’t tolerate another drive failure during the rebuild. With new drives I do use raid 5 (z1), but with used drives I’d want that extra assurance.

If you’re getting used drives I’d recommend running the array in raid z2 or raid 6 for more parity drives

Nah engines are fine since they don’t have enough time to cool down at a stop light. The oil mostly stays put over that short amount of time.

Yeah, it kinda seems like RSS died shortly after Aaron died

One of the benefits when I used to use RSS was that the feed could be updated and cached so articles could be read when you don’t have an active Internet connection. Not as big of a deal these days, but a decade ago cell networks were spottier and free Wi-Fi wasn’t always available.

I always loved how pulse layed out each of the feeds and showed the headline and first image of the article.

Maybe, but it seems to be fine with matched speed ram. I think my issue at least is due to it being 1st Gen Ryzen. Originally on 32GB 2133mt/s, upgraded to 48GB 3200. Some light reading in-between switching ram sticks suggested not mixing G1 (2133,2400,2666,2933) & G2 (3000, 3200, 3600+) ddr4. And that is what my, testing found. Again, could just be 1st Gen issues tho.

You know, I had the same thought/opinion on Sunday before I spent 4 hours trying random combinations of leftover ram before I found a combo that would boot on my am4 board. Up to 48GB ram on my server now

~~I use truenas scale. And then run servers like Plex, ersatz tv, Minecraft, and palworld. ~~

I think I misunderstood. If you’re looking to play the disks on a display, truenas won’t work for you.

If it’s thermal paper/stickers and it advances the paper but doesn’t actually print anything, you might double check to make sure the paper is still good. Hold it over a lit lighter and make sure it darkens with heat.

Nevermind, I missed the last paragraph where it’s already working on Windows

eBay has plenty of x86/x64 computers that don’t technically support Windows 11. An old Lenovo desktop/sff with a 7th gen i7 could be a pretty cheap entry point. 8th Gen and up will be more expensive since they can still run windows 11

Can you just turn the robots.txt into a click wrap agreement to charge robots high fees for access above a certain threshold?

iirc they track the hardware changes and do allow motherboard swaps, but it may be safer to swap cpu first, then motherboard

Not as easy on a laptop, like this is. Usually a pain in the ass to replace laptop chicklet keyboard keys, if you can even find a replacement without a windows icon

LMAO, I thought that was a windows app store icon.

No, the graphics from Intel back in 07-10 were crap. 2012-2013 would be my bare minimum, usb3 if only for loading a new OS.

Couple years ago I wouldn’t have argued, but with graphics cards ballooning to 3+ slots, you have to be more careful about which slots on the motherboard have full enough lanes to support your cards. And you have to make sure your motherboard has the full x16 slot in the highest position which is less common on boards with m.2. otherwise there isn’t room for expansion cards